Custom Mirror Installation in McKinney, TX

Yes. We fabricate mirrors in custom shapes — arched tops, oval profiles, angled corner cuts, eyebrow shapes, and full-template custom outlines. Each shape is cut from a paper or vinyl template that we produce on-site at the measurement appointment, then traced and cut in our Corinth shop. Shape complexity affects lead time and cost.

Yes — bar-back mirrors, restaurant fitting-room and accent mirrors, retail decorative panels, and boutique-hotel guest-room mirrors. Commercial mirror work is quoted against project drawings rather than per-square-foot.

Older homes around the Historic Downtown square and parts of east McKinney often have plaster-and-lath rather than drywall, which requires different hardware than standard installs. We use lead anchors or toggle bolts (depending on cavity depth behind the lath), avoid over-tightening that can crack the plaster face, and add additional anchor points to distribute load more conservatively than a drywall install would need.

Use a lint-free microfiber cloth and an ammonia-free glass cleaner — Sprayway, Windex Ammonia-Free, or a 50/50 vinegar-water mix all work well. Avoid standard Windex with ammonia long-term; it can attack the back-paint layer over years of exposure, particularly on mirrors with custom-cut edges where the backing is closer to the perimeter. Always spray the cloth, not the mirror directly, so liquid doesn't run down and pool at the bottom edge where it can wick under the backing seal. North Texas water is moderately hard — if you see mineral spotting along the bottom edge, that's the water rather than the mirror itself, and a vinegar wipe will lift it. For mirrors in steam-exposed primary bathrooms, a monthly squeegee after a hot shower extends the time between deep cleanings.