Bathtub Glass Door and Tub Enclosure Installation
Bathtub Shower Doors — Custom Glass for the Tub You Already Have
A shower curtain is the cheapest thing in your bathroom and it looks like it. We build glass tub doors — sliding, hinged, and fixed-panel — measured and fitted to your tub deck and walls.
Tub-shower combos are the most common bathing setup in DFW homes, and nearly all of them start life with a curtain and a spring rod. It works, barely: curtains billow inward, leak at the edges, mildew along the hem, and visually chop the room in half. A glass tub door fixes all of it — and it's a fraction of the cost of a full bathroom remodel.
Tub work is its own discipline. The glass mounts to a tub deck rather than a curb, which means the door carries different loads, the panel heights run taller, and the fit has to account for tubs that are rarely level and walls that are rarely plumb. We measure all of it and order each panel cut to those dimensions, the same way we build our walk-in enclosures.
Whether it's a sliding bypass system over a standard 60-inch alcove tub, a hinged door that swings clear for bathing kids, or a single fixed splash panel in the European style, our team builds it to your tub — not to a stock size that almost fits.
Why Choose Us
What Sets Our Bathtub Shower Door Installation Apart
Built to Your Tub, Not a Stock Size
Out-of-level decks and out-of-plumb walls are the norm. We measure and order to your tub's actual dimensions, so panels hang true and close clean.
Sliding, Hinged & Fixed-Panel Styles
Bypass sliders for tight rooms, hinged doors for wide access, fixed splash panels for a minimal European look — all custom-ordered to your tub's dimensions.
Frameless & Semi-Frameless Options
No chunky perimeter frames. Fully frameless with through-glass hardware, or semi-frameless with a slim top track at a friendlier price.
No Bottom-Track Grime
Our sliding systems ride a top bar with no water-trapping bottom channel — the part of old tub doors everyone hates cleaning.
Odd Tubs Welcome
Garden tubs, corner tubs, rolled-rim vintage tubs, non-standard widths — custom-ordered glass means unusual openings are routine work.
Matched Hardware Finishes
Brushed nickel, chrome, matte black, and brushed gold — coordinated with the fixtures already in your bathroom.
Which Tub Door Style Is Right for Your Bathroom?
Sliding bypass doors are the workhorse: two panels gliding on a track, nothing swinging into the room, full coverage along the tub's length. Modern frameless bypass systems bear no resemblance to the rattling framed sliders of the 1990s — the panels ride on exposed rollers along a slim top bar, and there's no bulky bottom track collecting grime.
Hinged tub doors swing open like a walk-in enclosure door, usually paired with a fixed panel. They give you the widest clear opening — the practical choice if you're bathing children or pets, or if reaching into the tub matters more than floor clearance.
Fixed splash panels — a single stationary pane covering the showerhead end of the tub with the rest left open — are the fastest-growing style we install. No moving parts, no track, easy in-and-out access, and a distinctly European look. If your priority is stopping spray at the source with minimal visual weight, this is the one.
Frameless Tub Doors: The Same Standard as Our Walk-In Enclosures
Everything that distinguishes our walk-in enclosures carries down to tub work. Fully frameless configurations use thick tempered glass with hardware mounted directly through the panel — no perimeter aluminum, no channels trapping water against your tub deck.
Semi-frameless tub systems keep a slim top rail for the sliding track while eliminating side and bottom framing, landing at a friendlier price with most of the visual benefit. We build both, and we'll tell you plainly which one your tub, walls, and budget actually call for.
Hardware finishes match the rest of our line — brushed nickel, chrome, matte black, and brushed gold — so your tub door coordinates with the faucet and fixture package you already have.
The Fit Problem: Why Tub Doors Punish Stock Sizing
Big-box tub doors assume a level tub deck and plumb walls. Almost no DFW home — new construction included — actually has both. Set a stock door on a deck that's off by a quarter inch and the panels rack: gaps open at one end, rollers wear unevenly, and the door never quite closes clean.
Because every panel is ordered from a measurement rather than pulled off a shelf, the glass is cut to your measured reality instead of the builder's intention. Out-of-level decks get compensated in the panel dimensions; out-of-plumb walls get scribed fills rather than caulk-stuffed gaps. This is the single biggest reason to buy a tub door from a company that measures first.
It also means odd tubs aren't a problem — garden tubs, corner tubs, vintage tubs with rolled rims, and openings wider or narrower than the standard 60 inches all get glass built to fit.
Tub Door or Tub-to-Shower Conversion? An Honest Comparison
If nobody in your house has taken a bath in five years, the better long-term move may be removing the tub entirely and converting to a walk-in shower — and we do the glass for those conversions constantly.
But a conversion is a renovation: demolition, plumbing, a new pan, new tile, and typically $8,000–$15,000+ before the glass. A custom tub door delivers most of the daily-use upgrade — no curtain, no leaks, a dramatically cleaner look — for a tenth of the disruption, and it preserves the tub that resale buyers with young kids consistently want.
Our advice runs on a simple rule: if the tub still gets used, or might matter at resale, put quality glass on it. If it's been a towel rack for years and this is your forever layout, convert it. We're set up to do either.
Our Process
From First Call to Finished Install
Free Consultation
Tell us about your tub and how the shower gets used. We'll recommend a door style honestly — including a curtain-to-fixed-panel option if that's all the job needs.
Precision Measurement
We laser-measure your tub deck, wall angles, and opening — catching the out-of-level and out-of-plumb conditions stock doors can't handle.
Custom-Ordered to Fit
Panels are ordered cut, tempered, and edge-finished to your tub's actual geometry. Typically 7–10 business days.
Installation & Water Test
Mounting, alignment, sealing, and a live water test before we leave. Most tub door installs take 2–4 hours.
From the Shop
A Recent Bathtub Shower Door Installation Project
“Donavon Wheeler treats tub work with the same spec discipline as our luxury walk-ins — his rule is that a tub door that racks on an out-of-level deck is a measurement failure, not an installation problem.”
In April 2026 we built a frameless sliding bypass system for a Castle Hills home in Lewisville — a standard 60-inch alcove tub whose deck ran 3/16 out of level end to end. Two 3/8-inch tempered panels cut to the measured deck line, top-roller track, brushed nickel hardware, no bottom channel. Measured on a Thursday, installed the following Wednesday in about three hours, water-tested before we left. Final cost: $1,750.
Tub door glass carries the same certifications as our enclosures — tempered to the ANSI Z97.1 safety glazing standard per National Glass Association (NGA) handling protocols, as the 2024 IRC 308 safety glass rules require for any glazing over a tub.
FAQ
Common Questions
How much do bathtub shower doors cost in DFW?
A semi-frameless sliding bypass system on a standard 60-inch tub typically runs $900–$1,500 installed. Fully frameless bypass systems run $1,400–$2,200. Hinged door-plus-panel configurations run $1,200–$2,000, and a single fixed splash panel starts around $700. Non-standard tubs add glass cost but not drama — we quote from your measurements, itemized, before anything is ordered.
Can you put a frameless glass door on any bathtub?
Nearly any. The requirements are a structurally sound tub deck wide enough to carry the glass and walls that can take hardware anchors. Standard alcove tubs, garden tubs, and most corner tubs all take glass well. Rolled-rim vintage tubs need a wall-mounted configuration that clears the curve — a job we've handled many times. The measurement visit settles it definitively.
Sliding or hinged tub door — which should I pick?
Pick sliding if floor space is tight or nothing can swing into the room; modern top-roller bypass systems glide smoothly and skip the grimy bottom track entirely. Pick hinged if you want the widest opening for bathing kids or pets. Pick a fixed splash panel if you mainly need spray control with the cleanest possible look. Tub width matters too — under 56 inches, a swing door usually wins.
Do glass tub doors leak where they meet the tub?
Not when the glass matches the tub's real geometry. Leaks on tub doors almost always trace to stock panels bridging an out-of-level deck, leaving a gap the caulk eventually surrenders to. We order the glass to the measured deck line and seal against it, then water-test at installation. If anything weeps afterward, we come back and make it right.
Is a glass tub door worth it compared to a shower curtain?
For daily use, yes — glass stops the billowing, the edge leaks, and the mildewed hem, and it visually doubles a small bathroom by letting light through the tub zone. It also outlasts a decade of replacement curtains. At resale, a glass tub door reads as an upgraded bathroom; a curtain reads as builder-basic. It's among the highest impact-per-dollar changes in the room.
Should I put a door on my tub or convert it to a walk-in shower?
If the tub still gets used — kids, soaking, resale flexibility — put quality glass on it and keep it. If it hasn't held water in years and this is your long-term layout, a tub-to-shower conversion is worth pricing; expect $8,000–$15,000+ with tile and plumbing before glass. We install glass for both paths and will give you a straight recommendation at the consultation.
Learn More
Related Guides from Our Blog
Ready for a Free Estimate in DFW?
Call us directly or request a quote online. Same-day estimates available for DFW and surrounding areas.