Storefronts & Offices — Dallas–Fort Worth
Commercial Glass Door Repair Across Dallas–Fort Worth
Commercial glass door repair is mostly hardware. A storefront or office door that drags, slams, swings too fast or won't latch is nearly always a closer, a pivot or a hinge — and those are fixed without replacing the door.
When the glass itself is cracked or broken, we measure the opening, order the new panel and fit it, booked around your business hours.
What usually goes wrong
Closers
The closer is the arm or floor unit that pulls the door shut. When it leaks or loses adjustment the door slams, drifts open or will not latch. Most can be re-adjusted; a leaking unit is replaced like for like so the door swings the way it did.
Pivots and hinges
Heavy glass doors hang on top and bottom pivots or on patch fittings. Worn pivots let the door drop and drag on the threshold, which chips the bottom edge — the edge where tempered glass is weakest. Catching that early saves the glass.
Broken or cracked glass
Tempered door glass cannot be patched or cut down. We measure the opening, order a new tempered panel with its fitting holes placed before tempering, and install it on the existing frame or patch hardware where that hardware is sound.
Who does the work
Donavon Wheeler runs the Dallas–Fort Worth operation out of Corinth. Infinity Glass & Glazing is family-owned and has glazed businesses in California for 30+ years — storefronts, office partitions, hotels and restaurants. The doors pictured are California jobs from that operation.
One company owns the job from the first look through the warranty. Visits are booked during standard hours, Monday to Friday, planned around your opening hours. New panels are tempered and tagged to ANSI Z97.1. Fully insured, and estimates are free.
Questions we get from business owners
Why does our glass storefront door slam shut?
Usually the closer. Its valves control how fast the door swings and latches; when they drift out of adjustment or the unit starts leaking fluid, the door closes too fast. Adjustment fixes most; a leaking closer needs replacing.
Can you fix a glass door that drags on the floor?
Yes. A dragging door has dropped on worn pivots or a loose hinge. We reset or replace the pivot so the door clears the threshold again — and check the bottom edge of the glass for chips while we are there.
Can the repair be scheduled outside our busiest hours?
Yes. Commercial work is booked in advance, and we plan the visit around when you can spare the entrance. What we do not offer is unscheduled emergency call-out.
Do you replace a broken pane in a storefront entrance?
Yes. Door glass has to be tempered safety glazing, so the new panel is ordered to the opening rather than cut on site, then fitted to the existing door where the frame or hardware is still sound.
For a broken pane in the storefront wall rather than the door, see our guide to storefront pane replacement. New storefronts are covered under storefront glass installation, and everything else we do for businesses under business glazing.
Tell us what the door is doing
Slamming, dragging, not latching or broken glass — a short video of the door opening and closing, plus a photo of the top and bottom hardware, is usually enough to tell which part has failed.